Lighting Mode: (Mode can be customized)
100% bright lighting before midnight
+70% lighting with sensor
+50% lighting till dawn (energy saving mode to prolong overcast backup days )
►Daytime and nighttime will be recognized according to the output voltage of solar panel. When nightfall, the ►LED lighting operates; when daytime, charge the battery. ►With MPPT technology, the battery will be charged max by the sunlight. ►Read the data: Read the data of PV module in real-time by smartphone APP.
►Starts non loaded: Minimum speed is 2m/s to start the wind turbine. ►Electronic braking system: Braking system will turn on automatically when wind speed ≥ 35m/s. ►Discharging while charging: At night, the wind turbine workes to support the LED lighting and also charge the battery. Read the data: ► Read the data of wind turbine in real-time by smartphone APP►Utilize ligh effiency LED, with integrated optical lens. ►PWM adjustment, constant current output. ►PIR motion sensor: enter energy-saving mode when nobody to prolong backup days. ►With RED pathway indicator, for warning effect and decoration at night. (Can ajust the brightness and time of switch-on/off by smartphone APP)
Please don’t install when gale weather; Please keep the blade rotating area 100% safe; Please keep the solar panel can 100% got sunlight. Installation steps are as below:Especially for high latitude area, alpine region and area lack of sunlight but with rich wind energy.
3.Remember to insert the copper tube before assembling the tail
6.Take the wind turbine cables out through the round hole
2.Put the fairing cap on the blade plate and fix it with screws
1.Let the blade cover with “Number Mark” face down, and fix it on flade plate with screws
9.Fix the light on the socket by screws and insert the wind turbine cables into bracket
5.Wrap the top of the socket with non-slip mat, and insert into the wind turbine
4.Insert the wind turbine cables into the connecting socket
12.Check all the screws fasten, and make the light pole upright, installation finish
8.Insert the light pole into the connecting socket and fix it with screws
7.Fasten the three longest screws on the connecting socket
10.Open the window plate, connect the cables and connector
11.Put the connected parts in and lock up the window plate
The storage of lithium battery pack can be customized: ►Inside there is a cell baffle to protect the battery, NTC temperature sensor and heater band. ►Real-time detection of the voltage and currency to avoid the overcharging, overdischarging and overcurrent. ►Real-time detection of battery temperature to start the battery heating when extremely low temperature, and stop heating when up to 10 degrees. (Also can monitor the battery data by smartphone APP)Support troubleshooting, read light data and control the light switch on/off by smartphone bluetooth APP.